1. Install the lifting rod bracket
2. Install the tow bar
3. Insert the tow bar into the site solar light towers, fix it inside the site solar light towers with bolts, then put down the front support legs and adjust the support legs to a suitable height.
4. Install the wire rope.
5. Pull all the crossbars until the positioning pins are automatically inserted, and prop up the supporting feet so that the supporting feet are in firm contact with the ground to resist strong winds.
6. Start the winch until the light pole is vertical, and lock the safety pin at the bottom of the light pole to prevent the lifting pole from shaking.
7. Run the site solar light towers lighting function.
8. Lifting rod lifting operation.
9. Solar panel angle adjustment.
